After resuming work, what should I do if there is a mechanical injury accident? During the epidemic, centralized training cannot be performed. Please forward it to every front-line operator. Work safely and never relax!

 

　　 Installation instructions

 

        Welcome to use the die-cutting machine products produced by Tangshan Jinweida Printing Machinery Co., Ltd. This equipment is a professional equipment for the printing and packaging industry. For the safe and efficient use of this equipment, the company specifically refers to the "National Safety Production Management Regulations" 》This guide has been formulated. Please read the following in detail and strictly implement each regulation.

 

　　一. After the equipment is shipped to the factory, the company will assign professional engineers to do on-site guidance. Before lifting and unloading, check whether the equipment is running or bumping during transportation. If there is any phenomenon such as rain, missing items, etc., please contact the manufacturer in time. If none of the above happens, please fill in the receipt form provided by the manufacturer. (So ​​that the manufacturer can archive)

 

　　 2. The hoisting and handling of the equipment must be completed by a qualified handling company. And follow the guidance and opinions of engineers. The company is not responsible for any illegal lifting operations.

 

　　 3. When the equipment arrives at the production station, the engineer will guide it in place. The equipment comes with accompanying tools and related accessories. Please check with the engineer in time and keep it properly. If there is any omission, report it to the engineer in time and fill it up.

 

　　4. During the installation and commissioning of the equipment, no one can operate the equipment without the permission of the engineer. If a similar situation occurs, the engineer has the right to stop the installation. Engineers must actively cooperate with their work during installation and commissioning, so that the equipment can be put into normal production as soon as possible.

 

　　5. The equipment must be operated by professional and technical personnel. If there is no captain in this area, the captain must undergo strict training by engineers before taking the job.

 

     Welcome to use the die-cutting machine products produced by Tangshan Jinweida Printing Machinery Co., Ltd. For the safe and efficient use of this equipment, our company has specially formulated this procedure with reference to the "National Safety Production Management Regulations". Please read the following content in detail. And strictly enforce every regulation.

 

　　一. Remember the principle of safe production. Do not have a fluke mentality, carefully eliminate every hidden safety hazard, carefully analyze the causes of each accident and eliminate them. Only safety is the most important thing. Operators must be strictly trained before they can work. Familiar with the safety performance and safe operation procedures of this machine is a guarantee to ensure the safety of operators.

 

　　 2. When the equipment is operating, no part of the body is allowed to enter the operating range of the equipment and the tooth row to avoid personal injury. When you need to enter the equipment for adjustment, cleaning or maintenance, you must turn off the power and air source. After the flywheel stops rotating, press the stop button to open the safety door, and hang the sign prohibiting power-on to enter. The safety window switches, buttons, and clutches on the machinery may malfunction or malfunction due to electromagnetic interference, aging, vibration, etc. Therefore, just opening the safety windows and pressing the operation stop button cannot guarantee the safety of workers entering the machinery. Especially in the paper feeding part and the paper delivery part industry, too many accidents have caused people to be injured by the tooth row due to violations.

 

　　3. When operating the equipment, the clothing should wear tight cuffs, and there should be no unnecessary decorations on the clothing, such as streamers, colored ropes and other dangerous decorations. Women with long hair should coil up their long hair during operation to avoid getting involved in the equipment and causing serious injury.

 

      4. The safety devices such as safety detection switches, buttons, work stop buttons and emergency stop buttons on the equipment are the second safety guarantee after the employees operate in violation of regulations. Every shift must check whether the switch work is effective, if any abnormal equipment is found Stop the machine immediately and replace the switch and other accessories until it works normally. Under no circumstances will it be allowed to turn on the machine without using the safety detection switch.

 

　　5. When adjusting or repairing the equipment, the tools used should be placed in the tool box, and can not be placed randomly, so as to avoid being involved in the equipment and causing injury. Useless items are cleared out of the work area in time.

 

　　6. ​​When the equipment is working, only trained and qualified die-cutting machine operators can enter the work area. Other personnel are not allowed to enter the work area without the captain's permission. The captain is responsible for the safety of non-operators who are allowed to enter the work area.

 

　　 Seven. When the equipment is ready to be turned on, carefully observe whether there are other people working in the equipment or in the operation area or there are objects that affect the startup. It can be turned on only when it is safe to do so.

 

　　 8. When the warning bell is pressed, it must be operated in jog mode, and check again for safety hazards, and then start normally when it is confirmed that everything is normal.

 

　　 Nine. All the safety signs on the equipment always remind the operator of the relevant dangerous points, and it is forbidden to tear it up. If it is found to be damaged, please replace it in time.

 

　　10. The electrical components, circuits, oil circuits, gas circuits, chains, and belts on the equipment must be regularly inspected by professionals and recorded to prevent dangerous situations such as moisture, fatigue, and wear.

 

　　11. Employees are prohibited from turning on the equipment after drinking or taking drowsiness or psychoactive drugs.

 

　　12. Before starting the machine, check whether the air pressure, oil pressure, lubrication and electrical appliances are normal at all parts of the equipment, whether the switches and safety devices are reliable, and fill each part that needs to be lubricated.

 

　　13. During the operation of the equipment, it is forbidden to reach out to the operating part, the pressure plate and the internal adjustment of the paper stack. If adjustment is required, the machine must be stopped. It is strictly forbidden to drill under the machine to adjust the equipment during the production process.

 

　　 14. When disassembling and installing the template, the protection setting must be turned on, and the fixing device must be carefully checked for tightness and safety. Prevent the frame and steel plate from falling and being injured.

 

　　15. All parts of the body are forbidden to enter under and above the paper feeding and delivery lifting platform at any time during mechanical work to prevent the lifting platform from suddenly falling or lifting when the motor, chain, or electric appliance fails, causing smashing or crushing injuries. If maintenance or adjustment is required, it must be minimized and the power and air supply must be turned off.

 

      16. The cylinder or telescopic belt of the equipment with non-stop paper delivery device may extend at any time. It is strictly forbidden to enter the paper delivery part when the machine is working; when adjustment, maintenance or cleaning is necessary, the power and air supply of the whole machine must be turned off to prevent injury. .

 

　　17. Do not touch the paper feed roller and paper feed roller during the operation of the front-feed paper feeder. When the paper is warped, it is strictly forbidden to press the paper with your hands or your body to prevent your limbs from being caught in the rotating roller.

 

　　18. When the operator opens the mechanical guard for inspection and maintenance, shut down the machine and turn off the power and air supply. The maintenance workers must be professionals who understand the mechanical principle, electrical control principle, safety performance, and operating skills of this machine.

 

　　19. For models with hydraulic lifting platform device, operators are not allowed to enter under the lifting platform at any time.

 

　　 20. Operators must wear high friction work shoes when working, and it is forbidden to place debris, especially paper, on the pedals to prevent slipping on the workbench.

 

　　 The above regulations are the basic regulations for the safe production and operation of die-cutting machines. The relevant personnel must read them carefully and operate in strict accordance with the regulations to ensure the safety of employees.